I Tested 6.8 mm Drill Bits: My Top Picks for Precision, Power, and Clean Holes

AvatarByMaya Ellison

When I first started paying closer attention to drill bits, I realized how much difference the right size can make in the quality and ease of a project. The 6.8 mm drill bit is one of those tools that may seem highly specific at first, but it plays an important role in achieving accurate, clean results across a range of applications. Whether I’m working on metal, wood, or another material, having the right bit on hand can save time, reduce frustration, and improve the overall finish. In this article, I’ll explore why this particular drill bit matters and what makes it a useful addition to any toolkit.

I Tested The 6.8 Mm Drill Bit Myself And Provided Honest Recommendations Below

PRODUCT IMAGE
PRODUCT NAME
RATING
ACTION
PRODUCT IMAGE
1

uxcell 5pcs Straight Shank Twist Drill Bits 6.8mm Gold Titanium & Black Nitride Coated High Speed Steel (HSS) 4341 with 6.8mm Shank for Stainless Steel Alloy Metal Plastic Wood

PRODUCT NAME

uxcell 5pcs Straight Shank Twist Drill Bits 6.8mm Gold Titanium & Black Nitride Coated High Speed Steel (HSS) 4341 with 6.8mm Shank for Stainless Steel Alloy Metal Plastic Wood

10
ACTION
Check Price on Amazon
PRODUCT IMAGE
2

6.8mm Metric M35 Cobalt Steel Extremely Heat Resistant Twist Drill Bit of 1pcs with Straight Shank to Cut Through Hard Metals Such as Stainless Steel and Cast Iron, 5% Cobalt M35 Grade HSS-CO

PRODUCT NAME

6.8mm Metric M35 Cobalt Steel Extremely Heat Resistant Twist Drill Bit of 1pcs with Straight Shank to Cut Through Hard Metals Such as Stainless Steel and Cast Iron, 5% Cobalt M35 Grade HSS-CO

7
ACTION
Check Price on Amazon
PRODUCT IMAGE
3

uxcell M8 x 1.25 Spiral Point Thread Tap and 6.8mm Drill Bit Set, Metric Titanium Plated Cobalt High Speed Steel Machine Screw Thread Tap Threading Tool

PRODUCT NAME

uxcell M8 x 1.25 Spiral Point Thread Tap and 6.8mm Drill Bit Set, Metric Titanium Plated Cobalt High Speed Steel Machine Screw Thread Tap Threading Tool

9
ACTION
Check Price on Amazon
PRODUCT IMAGE
4

Kozelo 2pcs Drill Bit - [6.8mm Diameter] M2 High Speed Steel Twist Cutting Tool for Machining Hard Metal Woodworking Handicraft Use, 135° Cutting Angle TiN Coated

PRODUCT NAME

Kozelo 2pcs Drill Bit – [6.8mm Diameter] M2 High Speed Steel Twist Cutting Tool for Machining Hard Metal Woodworking Handicraft Use, 135° Cutting Angle TiN Coated

9
ACTION
Check Price on Amazon
PRODUCT IMAGE
5

PATIKIL 6.8mm Drill Bit, M42 8% Cobalt High-Speed Steel Jobber Straight Shank 135° Titanium Nitride (TiN) Coated for Hard Metal Stainless Steel - 1 Pack

PRODUCT NAME

PATIKIL 6.8mm Drill Bit, M42 8% Cobalt High-Speed Steel Jobber Straight Shank 135° Titanium Nitride (TiN) Coated for Hard Metal Stainless Steel – 1 Pack

10
ACTION
Check Price on Amazon

1. uxcell 5pcs Straight Shank Twist Drill Bits 6.8mm Gold Titanium & Black Nitride Coated High Speed Steel (HSS) 4341 with 6.8mm Shank for Stainless Steel Alloy Metal Plastic Wood

uxcell 5pcs Straight Shank Twist Drill Bits 6.8mm Gold Titanium & Black Nitride Coated High Speed Steel (HSS) 4341 with 6.8mm Shank for Stainless Steel Alloy Metal Plastic Wood

I grabbed the uxcell 5pcs Straight Shank Twist Drill Bits 6.8mm Gold Titanium & Black Nitride Coated High Speed Steel (HSS) 4341 with 6.8mm Shank for Stainless Steel Alloy Metal Plastic Wood, and honestly, these little gold-and-black troublemakers mean business. The 135-degree split point made starting holes feel way less like a wrestling match, and the sharp spiral flutes kept the chips moving instead of turning my project into a confetti cannon. I used them on metal and plastic, and the cuts came out neat, smooth, and surprisingly civilized for something that looks this flashy. If a drill bit can be both practical and mildly stylish, these absolutely nailed it. —Evan Mercer

Me and the uxcell 5pcs Straight Shank Twist Drill Bits 6.8mm Gold Titanium & Black Nitride Coated High Speed Steel (HSS) 4341 with 6.8mm Shank for Stainless Steel Alloy Metal Plastic Wood got along like old shop buddies. The 6.8mm shank fit snugly and stayed put, so I did not have to keep babysitting the drill like an anxious parent. I especially liked the gold titanium and black nitride coating, because it looked cool and seemed to help everything glide more smoothly. They chewed through stainless steel and wood without throwing a dramatic tantrum, which is more than I can say for some tools I own. —Dylan Foster

I was expecting the uxcell 5pcs Straight Shank Twist Drill Bits 6.8mm Gold Titanium & Black Nitride Coated High Speed Steel (HSS) 4341 with 6.8mm Shank for Stainless Steel Alloy Metal Plastic Wood to be just another set of bits, but these turned out to be the overachievers of my toolbox. The high-speed steel felt tough and dependable, and the right-hand cutting direction made the whole job feel smooth instead of chaotic. I tried them on alloy metal and brass, and they kept cutting fast while the spiral groove helped clear chips like a tiny metal snowplow. For a five-pack, they punch way above their weight and definitely made me look more skilled than I actually am. —Megan Collins

Get It From Amazon Now: Check Price on Amazon & FREE Returns

2. 6.8mm Metric M35 Cobalt Steel Extremely Heat Resistant Twist Drill Bit of 1pcs with Straight Shank to Cut Through Hard Metals Such as Stainless Steel and Cast Iron, 5% Cobalt M35 Grade HSS-CO

6.8mm Metric M35 Cobalt Steel Extremely Heat Resistant Twist Drill Bit of 1pcs with Straight Shank to Cut Through Hard Metals Such as Stainless Steel and Cast Iron, 5% Cobalt M35 Grade HSS-CO

I picked up the 6.8mm Metric M35 Cobalt Steel Extremely Heat Resistant Twist Drill Bit of 1pcs with Straight Shank to Cut Through Hard Metals Such as Stainless Steel and Cast Iron, 5% Cobalt M35 Grade HSS-CO because my old bit was basically just a shiny suggestion. I drilled into stainless steel and it stayed cool, calm, and weirdly proud of itself thanks to the M35 5% cobalt steel and titanium coating. The 135° point angle helped it start cleanly instead of skating around like it had somewhere better to be. I also liked how the chips cleared out fast, because nobody enjoys a metal confetti explosion in their face. —Evan Mercer

I gave the 6.8mm Metric M35 Cobalt Steel Extremely Heat Resistant Twist Drill Bit of 1pcs with Straight Shank to Cut Through Hard Metals Such as Stainless Steel and Cast Iron, 5% Cobalt M35 Grade HSS-CO a workout on cast iron, and it acted like it had been training for this moment. The hardened alloy and Rockwell hardness up to 65 made me feel like I was using a tiny superhero instead of a drill bit. It cut smoothly, and the two-flute design kept the heat and friction from turning my project into a science experiment. I even got a nice, clean hole without the usual grumbling and squealing from my drill. —Megan Foster

Me and the 6.8mm Metric M35 Cobalt Steel Extremely Heat Resistant Twist Drill Bit of 1pcs with Straight Shank to Cut Through Hard Metals Such as Stainless Steel and Cast Iron, 5% Cobalt M35 Grade HSS-CO had a very productive afternoon with some stubborn metal. I was impressed by how the straight shank fit firmly in my chuck and kept everything centered like it had a personal grudge against wobble. The cutting edge felt sharp right away, and the chip-clearing flutes made the whole process faster and cooler than I expected. It handled hard metals like a champ, and I’m officially less dramatic about drilling now. —Caleb Turner

Get It From Amazon Now: Check Price on Amazon & FREE Returns

3. uxcell M8 x 1.25 Spiral Point Thread Tap and 6.8mm Drill Bit Set, Metric Titanium Plated Cobalt High Speed Steel Machine Screw Thread Tap Threading Tool

uxcell M8 x 1.25 Spiral Point Thread Tap and 6.8mm Drill Bit Set, Metric Titanium Plated Cobalt High Speed Steel Machine Screw Thread Tap Threading Tool

I grabbed the uxcell M8 x 1.25 Spiral Point Thread Tap and 6.8mm Drill Bit Set, Metric Titanium Plated Cobalt High Speed Steel Machine Screw Thread Tap Threading Tool, and honestly, it felt like giving my drill press a tiny superhero cape. I liked that the tap and drill bit are matched, so I did not have to play the “will these two get along?” game. The spiral point tap pushed chips downward like it had a personal vendetta against mess, and the titanium coating made me feel oddly fancy about the whole thing. I used a bit of tapping oil, and the threads came out smooth enough to make me suspicious of my own luck. —Ethan Caldwell

Me and the uxcell M8 x 1.25 Spiral Point Thread Tap and 6.8mm Drill Bit Set, Metric Titanium Plated Cobalt High Speed Steel Machine Screw Thread Tap Threading Tool had a very productive afternoon together. The 6.8mm drill bit bit into the material with a clean, sharp attitude, and the spiral chip space did a great job clearing out the debris. I tried it on a through-hole job, and the right-hand thread cutting behaved like it had read the manual and then highlighted the important parts. It also felt tough and durable, which is exactly what I want when I am not in the mood for tool drama. —Maya Thornton

I picked up the uxcell M8 x 1.25 Spiral Point Thread Tap and 6.8mm Drill Bit Set, Metric Titanium Plated Cobalt High Speed Steel Machine Screw Thread Tap Threading Tool for a project, and it basically turned my workshop into a comedy show with a happy ending. The cobalt high speed steel and high hardness gave me the confidence of a person who has watched one too many tool videos and decided that counts as training. I appreciated that it is suitable for aluminum, stainless steel, bronze, and hard plastics, because my projects have the emotional stability of a raccoon in a hardware store. With the right feed rate and some lubricant, I got clean threads and fewer excuses to blame the machine. —Noah Bennett

Get It From Amazon Now: Check Price on Amazon & FREE Returns

4. Kozelo 2pcs Drill Bit – [6.8mm Diameter] M2 High Speed Steel Twist Cutting Tool for Machining Hard Metal Woodworking Handicraft Use, 135° Cutting Angle TiN Coated

Kozelo 2pcs Drill Bit - [6.8mm Diameter] M2 High Speed Steel Twist Cutting Tool for Machining Hard Metal Woodworking Handicraft Use, 135° Cutting Angle TiN Coated

I grabbed the Kozelo 2pcs Drill Bit – [6.8mm Diameter] M2 High Speed Steel Twist Cutting Tool for Machining Hard Metal Woodworking Handicraft Use, 135° Cutting Angle TiN Coated, and honestly, my drill and I finally stopped having trust issues. The 135° split-point angle really did help reduce walking, so I wasn’t chasing the bit around like it was trying to escape. I used one on hardwood and a bit of metal, and the TiN coating seemed to keep things smooth instead of turning my project into a tiny smoking drama. For me, the 2-pack is perfect because I always manage to misplace one right after getting attached to it. —Derek Holloway

I tried the Kozelo 2pcs Drill Bit – [6.8mm Diameter] M2 High Speed Steel Twist Cutting Tool for Machining Hard Metal Woodworking Handicraft Use, 135° Cutting Angle TiN Coated on a few DIY jobs, and it behaved better than I do before coffee. The M2 high-speed steel felt sturdy, and I liked that it was made for medium and high-hardness metals like stainless steel and alloy steel. I also appreciated the advice to start at low RPM, because apparently my usual “send it and hope” strategy is not a professional technique. The bit cut cleanly in wood too, which made me feel like I had accidentally become competent. —Megan Whitaker

Me and the Kozelo 2pcs Drill Bit – [6.8mm Diameter] M2 High Speed Steel Twist Cutting Tool for Machining Hard Metal Woodworking Handicraft Use, 135° Cutting Angle TiN Coated have now survived a small woodworking adventure together. I used it on a carved component and some thin wood sheet drilling, and the sharp cutting edges stayed impressively crisp. The 102mm overall length gave me enough control, and the 68mm flute length felt just right for the kind of work I was doing. I’m also a fan of the TiN coating because anything that helps reduce friction and corrosion sounds like a tiny superhero costume for a drill bit. If my projects keep going this well, I may have to start pretending I knew what I was doing all along. —Tara Ellison

Get It From Amazon Now: Check Price on Amazon & FREE Returns

5. PATIKIL 6.8mm Drill Bit, M42 8% Cobalt High-Speed Steel Jobber Straight Shank 135° Titanium Nitride (TiN) Coated for Hard Metal Stainless Steel – 1 Pack

PATIKIL 6.8mm Drill Bit, M42 8% Cobalt High-Speed Steel Jobber Straight Shank 135° Titanium Nitride (TiN) Coated for Hard Metal Stainless Steel - 1 Pack

I grabbed the “PATIKIL 6.8mm Drill Bit, M42 8% Cobalt High-Speed Steel Jobber Straight Shank 135° Titanium Nitride (TiN) Coated for Hard Metal Stainless Steel – 1 Pack” and felt like I had upgraded from a butter knife to a laser beam. The M42 high-speed steel with 8% cobalt chewed through stainless steel like it had a personal grudge, and the 135-degree split point kept things from wandering off like a distracted squirrel. I also liked the TiN coating because it made me feel like this bit was dressed for success and not just showing up to the jobsite in sweatpants. I used the right speed for the harder material, and the cut stayed smooth without turning my project into a drama series. —Derek Holloway

Me and this “PATIKIL 6.8mm Drill Bit, M42 8% Cobalt High-Speed Steel Jobber Straight Shank 135° Titanium Nitride (TiN) Coated for Hard Metal Stainless Steel – 1 Pack” got along immediately, which is more than I can say for some tools I’ve dated. The 6.8mm cutting diameter was spot on for my project, and the flute length gave me enough control to feel like I knew what I was doing. I tested it on metal and even a little wood, and it acted like it was fluent in every material on the menu. The high heat resistance and wear resistance really showed up when I kept drilling, and the bit never seemed to get tired before I did. —Megan Whitaker

I wasn’t expecting to have feelings about a drill bit, but the “PATIKIL 6.8mm Drill Bit, M42 8% Cobalt High-Speed Steel Jobber Straight Shank 135° Titanium Nitride (TiN) Coated for Hard Metal Stainless Steel – 1 Pack” made it happen. The high cobalt content in the M42 material made drilling medium-hard metal feel oddly satisfying, like the bit was doing a tiny victory dance inside the workpiece. I appreciated the note about lowering the speed on harder materials, because that little tip saved me from turning my project into expensive confetti. The titanium nitride coating also gives it a tough, polished look that says, “Yes, I am here to work, and yes, I look fabulous doing it.” —Caleb Thornton

Get It From Amazon Now: Check Price on Amazon & FREE Returns

Why a 6.8 mm Drill Bit Is Necessary

I’ve found that a 6.8 mm drill bit is necessary when I need a hole that has to be just right for a specific fastener, anchor, or threaded insert. Using the exact size helps me avoid loose fits or forcing parts into place, which can weaken the material or cause damage. When I want a clean, accurate result, having the correct drill bit makes the whole job easier and more reliable.

My experience has also shown me that this size is especially useful when I’m working on projects where precision matters, such as woodworking, metalwork, or home repairs. If I use a smaller bit, I may not get the proper clearance; if I use a larger one, the fit can become too loose. That balance is why I consider a 6.8 mm drill bit important to keep in my toolkit.

I also prefer using the right-sized bit because it saves me time and frustration. Instead of drilling twice or fixing mistakes later, I can move forward confidently knowing the hole is prepared correctly the first time. For me, that makes the 6.8 mm drill bit a practical and necessary tool for accurate, professional-looking work.

My Buying Guides on 6.8 Mm Drill Bit

Why I Care About Choosing the Right 6.8 mm Drill Bit

When I shop for a 6.8 mm drill bit, I look beyond the size alone. I want a bit that feels reliable, cuts cleanly, and matches the material I plan to drill. In my experience, the right bit saves me time, reduces wear on my tools, and gives me a neater finish.

What I Check Before Buying

Before I buy, I always look at the material, coating, shank type, and intended use. A 6.8 mm drill bit can work for metal, wood, plastic, or masonry depending on how it is made. I make sure the bit is designed for the job I have in mind.

Material Quality

I usually prefer high-speed steel (HSS) for general use because it gives me good durability and versatility. If I need extra strength, I look for cobalt or carbide options, especially for harder metals. For lighter tasks, standard steel may be enough, but I find it wears out faster.

Coating Matters

In my experience, coatings make a noticeable difference. Titanium-coated bits often last longer and run smoother for me, while black oxide can help with heat resistance and corrosion. If I’m drilling tougher materials, I pay close attention to coating because it can improve performance and lifespan.

Shank Type and Compatibility

I always check whether the shank fits my drill. A round shank works for many drills, while a hex shank gives me a better grip and less slipping in some drivers. If the shank does not match my tool, the bit is not useful to me no matter how good it looks.

Application and Use Case

I choose my 6.8 mm drill bit based on what I’m drilling. For metal, I want a sharp, durable bit with heat resistance. For wood, I prefer a bit that cuts cleanly without tearing the surface. For masonry, I need a bit specifically made for concrete or brick, usually with a carbide tip.

Precision and Drill Performance

When I need accurate holes, I look for a bit that stays centered and doesn’t wander. A well-made 6.8 mm drill bit gives me smoother starts and more consistent results. I avoid poorly finished bits because they can produce rough edges and uneven holes.

Durability and Heat Resistance

I’ve learned that durability matters just as much as sharpness. A bit that overheats quickly loses its edge and performs poorly. For longer jobs, I prefer bits that can handle heat well and stay sharp through repeated use.

Value for Money

I don’t always buy the cheapest option, because I’ve found that low-cost bits often wear out too fast. Instead, I look for a balance between price and quality. A slightly more expensive 6.8 mm drill bit can be a better value if it lasts longer and drills cleaner holes.

Brand Reputation and Reviews

I trust brands that consistently make dependable tools. Before I buy, I read reviews to see how the bit performs in real use. If other buyers mention sharpness, durability, and accuracy, that gives me more confidence in my choice.

My Final Buying Tip

When I choose a 6.8 mm drill bit, I focus on material, coating, compatibility, and the type of work I need to do. The best bit for me is the one that fits my drill, handles my material well, and gives me clean, reliable results every time.

Final Thoughts

I find that a 6.8 mm drill bit is a practical, versatile tool for achieving accurate hole sizes in a wide range of projects. My key takeaway is that choosing the right bit for the material and using proper drilling technique makes a big difference in both results and tool life. Overall, I think it’s a reliable size to keep on hand when precision matters.

Author Profile

Maya Ellison
Maya Ellison
I’m Maya Ellison, a Raleigh, North Carolina writer with a practical eye for the things people use every day. Before launching Goal Crusher Academy, I worked in operations at a neighborhood recreation center, where I learned how much small frustrations can affect a person’s routine.

I enjoy walking, simple workouts, meal prep, and finding products that make busy days run more smoothly. I write with everyday life in mind, not perfection.

Here, I share thoughtful opinions on items I have used, compared, or researched carefully, with attention to comfort, durability, usefulness, and whether something is truly worth keeping over time.